I own and have available for use in any show the
following sound system components. I have all the
necessary patch cables and power cables needed to
use this equipment in any combination
required.
|
|
This unit has 2-channel operation with 1/4" input,
gain, level and distortion mode on channel 1; XLR
mic inputs on channel 2. Equipped with 8 digital
effects, headphone and footswitch jacks, and dual
RCA inputs, featuring a 50W 10" woofer and can be
operated on a four hour battery or off of a 120 V
line.
|
|
This unit is a 80 watt 6 channel mixer amplifier.
It can take either 1/4" or XLR inputs on the four
channels and has a separate RCA tape connection.
It has two 8 ohm 1/4" output lines. It runs on 120
volt AC current.
|
|
These are two 10" woofers and horns with passive
crossovers, using a dual-port design to produce
optimum bass response.
|
|
This unit is a Single cassette deck with a built
in equalizer.
|
|
This is a 1-beam laser unit that produces 16 ohms
at 1kHz. It can run on either batteries or 120 AC
current with a 6V DC adapter.
|
|
This is a 49 key electronic keyboard with tone
bank that can be run on either batteries or 120V
AC current with a 9V DC adapter.
|
|
Currently, I have six Nady Starpower 9 XLR hand
held mics, one Nady HM-1 Headset XLR mic, one
Optima Headset 1/8" mic, one Optima Wireless Lav
mic, and several high impedance mics.
|
|
These are four floor rest halogen lights that
utilize a 500 Watt bulb and run on 120V AC
current.
|
