Hank Breedlove Machine Shop         P.O. Box  12756       Gastonia, NC  28052

     EMAIL:  breedlove1@bellsouth.net               PHONE:   704 853 8746 

HANK  BREEDLOVE  MACHINE  SHOP - The Junk Yard, Just trying to break even here.

This is what is known as over building, but it was the first model I designed with the military being the possible customer.   And they usually want it to be bullet proof.  And it is,  so that's  why I call it the "Tank Turret"  Six pounds of aluminum alloy and stainless steel, with hand knobs for setting any angle or direction.  Set on 4 inch backing plates, also aluminum. From the base to the top is 8 inches.  Ten if you include the pedestal mount. The hole in the top plate is 5/8 inch diameter. The turret itself is not insulated and is usually grounded. There is a 1/4-20 screw in the side of the base plate for hooking up a ground strap.  You don't necessarily have to use it for an antenna. A little imagination and no telling what you can do.          $  45.00

The  Tank Turret Jr.

A smaller version of the same thing is also available with the only difference being that it is about two pounds lighter and the top is tapped 3/8-24 for the large insulators normally used.  The turret is not insulated and usually grounded.  The large rubber washer is to absorb the shock from a large antenna bouncing around. 

Junk Yard Price: $ 40.00

An extra heavy pedestal mount.  It is two inches in diameter and almost two inches tall.  Solid brass with two inch washers and insulators.

Price:   $ 20.00

A tank turret with a 3/8-24 threaded hole to hold one of my insulators.  Junk yard price:

$ 45.00

The original proto-type insulators,  they work fine, just don't look as good as the new style.

Price:  $ 15.00

This is a mount that was made but never produced.  It is one of a kind and there will be no more made.  So if you want an original, here it is for only  $ 15.00